0.00 (0.00)

Leo Thomas Leo Thomas

0 Course • 0 Student

0.00 (0.00)

Biography

JN0-351 Quiz & Latest JN0-351 Dumps Questions

P.S. Free & New JN0-351 dumps are available on Google Drive shared by VerifiedDumps: https://drive.google.com/open?id=1XJHlM4BdFmBibXv-O15LHoNYwCdHpeCJ

You may be busy in your jobs, learning or family lives and can’t get around to preparing and takes the certificate exams but on the other side you urgently need some useful JN0-351 certificates to improve your abilities in some areas. So is there a solution which can kill two birds with one stone to both make you get the certificate and spend little time and energy to prepare for the exam? If you choose the test Juniper certification and then buy our JN0-351 prep material you will get the panacea to both get the useful certificate and spend little time. Passing the test certification can help you stand out in your colleagues and have a bright future in your career.

Juniper JN0-351 Exam Syllabus Topics:

Topic	Details
Topic 1	High Availability: This topic covers the importance and application of high availability within Junos OS environments. Knowledge in configuring and managing these components is critical for ensuring robust and uninterrupted network operations, aligning with exam expectations.
Topic 2	Tunnels: The fundamentals of IP tunneling are emphasized, highlighting their requirements and functionalities. Mastery in configuring, monitoring, and troubleshooting tunnels equips professionals to meet the demands of the JN0-351 exam.
Topic 3	OSPF: The concepts and operational details of OSPF are explored, providing tools for routing efficiency. Configuration and troubleshooting mastery ensure readiness for both the exam and complex enterprise environments.
Topic 4	IS-IS: Aspiring Juniper networking professionals enhance their understanding of IS-IS routing protocols. This topic equips candidates with the knowledge to configure and monitor IS-IS systems, addressing specific exam challenges and practical applications.
Topic 5	Spanning Tree: Networking professionals explore the principles and advantages of the Spanning Tree Protocol (STP) to ensure loop-free topologies in Layer 2 networks.

>> JN0-351 Quiz <<

Latest JN0-351 Dumps Questions | Composite Test JN0-351 Price

There are many merits of our product on many aspects and we can guarantee the quality of our Enterprise Routing and Switching, Specialist (JNCIS-ENT) JN0-351 practice engine. Firstly, our experienced expert team compile them elaborately based on the real exam. Secondly, both the language and the content of our Juniper JN0-351 Study Materials are simple.

Juniper Enterprise Routing and Switching, Specialist (JNCIS-ENT) Sample Questions (Q31-Q36):

NEW QUESTION # 31
You are concerned about spoofed MAC addresses on your LAN.
Which two Layer 2 security features should you enable to minimize this concern? (Choose two.)

A. dynamic ARP inspection
B. DHCP snooping
C. IP source guard
D. static ARP

Answer: A,B

Explanation:
A is correct because dynamic ARP inspection (DAI) is a Layer 2 security feature that prevents ARP spoofing attacks. ARP spoofing is a technique that allows an attacker to send fake ARP messages to associate a spoofed MAC address with a legitimate IP address. This can result in traffic redirection, man-in-the-middle attacks, or denial-of-service attacks. DAI validates ARP packets by checking the source MAC address and IP address against a trusted database, which is usually built by DHCP snooping1. DAI discards any ARP packets that do not match the database or have invalid formats1.
C is correct because DHCP snooping is a Layer 2 security feature that prevents DHCP spoofing attacks.
DHCP spoofing is a technique that allows an attacker to act as a rogue DHCP server and offer fake IP addresses and other network parameters to unsuspecting clients. This can result in traffic redirection, man-in-the-middle attacks, or denial-of-service attacks. DHCP snooping filters DHCP messages by classifying switch ports as trusted or untrusted. Trusted ports are allowed to send and receive any DHCP messages, while untrusted ports are allowed to send only DHCP requests and receive only valid DHCP replies from trusted ports2. DHCP snooping also builds a database of MAC addresses, IP addresses, lease times, and binding types for each client2.

NEW QUESTION # 32
Which two mechanisms are part of building and maintaining a Layer 2 bridge table? (Choose two.)

A. listening
B. learning
C. blocking
D. flooding

Answer: B,D

Explanation:
Option B is correct. Flooding is a mechanism used in Layer 2 bridging where the switch sends incoming packets to all its ports except for the port where the packet originated1. This is done when the switch doesn't know the destination MAC address or when the packet is a broadcast or multicast1.
Option C is correct. Learning is another mechanism used in Layer 2 bridging where the switch learns the source MAC addresses of incoming packets and associates them with the port on which they were received23. This information is stored in a MAC address table, also known as a bridge table23.
Option A is incorrect. Blocking is a state in Spanning Tree Protocol (STP) used to prevent loops in a network2. It's not a mechanism used in building and maintaining a Layer 2 bridge table2.
Option D is incorrect. Listening is also a state in Spanning Tree Protocol (STP) where the switch listens for BPDUs to make sure no loops occur in the network before transitioning to the learning state2. It's not a mechanism used in building and maintaining a Layer 2 bridge table2.

NEW QUESTION # 33
A new network requires multiple topology support. You decide to use IS-IS in this situation. Which three protocol topologies are supported in this scenario? (Choose three.)

A. IPsec
B. IPv6
C. anycast
D. multicast
E. IPv4

Answer: B,D,E

Explanation:
Explanation
IS-IS (Intermediate System to Intermediate System) is a routing protocol that is designed to move information efficiently within a computer network12. It supports multiple protocol topologies, including IPv4, IPv6, and multicast12. Therefore, options C, E, and D are correct.

NEW QUESTION # 34
Exhibit

You are a network operator troubleshooting BGP connectivity.
Which two statements are correct about the output shown in the exhibit? (Choose two.)

A. The R1 is configured for AS 65400.
B. The routers are exchanging IPv4 routes.
C. The BGP session is not established.
D. Peer 10.32.1.2 is configured for AS 63645.

Answer: A,C

Explanation:
Explanation
Option B suggests that the BGP session is not established. This is correct because in the output, the state of the BGP session is shown as "Idle". In BGP, an "Idle" state means that the BGP session is not currently established1.
Option C suggests that R1 is configured for AS 65400. This is also correct because in the output, it's shown that the local AS number is 654001. The local AS number represents the Autonomous System (AS) number of the router on which you're checking the BGP session1.

NEW QUESTION # 35
Which three protocols support BFD? (Choose three.)

A. FTP
B. RSTP
C. BGP
D. OSPF
E. LACP

Answer: C,D,E

Explanation:
Explanation
BFD is a protocol that can be used to quickly detect failures in the forwarding path between two adjacent routers or switches. BFD can be integrated with various routing protocols and link aggregation protocols to provide faster convergence and fault recovery.
According to the Juniper Networks documentation, the following protocols support BFD on Junos OS devices1:
BGP: BFD can be used to monitor the connectivity between BGP peers and trigger a session reset if a failure is detected. BFD can be configured for both internal and external BGP sessions, as well as for IPv4 and IPv6 address families2.
OSPF: BFD can be used to monitor the connectivity between OSPF neighbors and trigger a state change if a failure is detected. BFD can be configured for both OSPFv2 and OSPFv3 protocols, as well as for point-to-point and broadcast network types3.
LACP: BFD can be used to monitor the connectivity between LACP members and trigger a link state change if a failure is detected. BFD can be configured for both active and passive LACP modes, as well as for static and dynamic LAGs4.
Other protocols that support BFD on Junos OS devices are:
IS-IS: BFD can be used to monitor the connectivity between IS-IS neighbors and trigger a state change if a failure is detected. BFD can be configured for both level 1 and level 2 IS-IS adjacencies, as well as for point-to-point and broadcast network types.
RIP: BFD can be used to monitor the connectivity between RIP neighbors and trigger a route update if a failure is detected. BFD can be configured for both RIP version 1 and version 2 protocols, as well as for IPv4 and IPv6 address families.
VRRP: BFD can be used to monitor the connectivity between VRRP routers and trigger a priority change if a failure is detected. BFD can be configured for both VRRP version 2 and version 3 protocols, as well as for IPv4 and IPv6 address families.
The protocols that do not support BFD on Junos OS devices are:
RSTP: RSTP is a spanning tree protocol that provides loop prevention and rapid convergence in layer 2 networks. RSTP does not use BFD to detect link failures, but relies on its own hello mechanism that sends BPDU packets every 2 seconds by default.
FTP: FTP is an application layer protocol that is used to transfer files between hosts over a TCP connection. FTP does not use BFD to detect connection failures, but relies on TCP's own retransmission and timeout mechanisms.
References:
1: [Configuring Bidirectional Forwarding Detection] 2: [Configuring Bidirectional Forwarding Detection for BGP] 3: [Configuring Bidirectional Forwarding Detection for OSPF] 4: [Configuring Bidirectional Forwarding Detection for Link Aggregation Control Protocol] : [Configuring Bidirectional Forwarding Detection for IS-IS] : [Configuring Bidirectional Forwarding Detection for RIP] : [Configuring Bidirectional Forwarding Detection for VRRP] : [Understanding Rapid Spanning Tree Protocol] : [Understanding FTP]

NEW QUESTION # 36
......

If you are still struggling to get the Juniper JN0-351 exam certification, VerifiedDumps will help you achieve your dream. VerifiedDumps's Juniper JN0-351 exam training materials is the best training materials. We can provide you with a good learning platform. How do you prepare for this exam to ensure you pass the exam successfully? The answer is very simple. If you have the appropriate time to learn, then select VerifiedDumps's Juniper JN0-351 Exam Training materials. With it, you will be happy and relaxed to prepare for the exam.

Latest JN0-351 Dumps Questions: https://www.verifieddumps.com/JN0-351-valid-exam-braindumps.html

DOWNLOAD the newest VerifiedDumps JN0-351 PDF dumps from Cloud Storage for free: https://drive.google.com/open?id=1XJHlM4BdFmBibXv-O15LHoNYwCdHpeCJ

Courses

No course yet.